Save 
Your Basket- Your basket is currently empty
Log In
Call Us
Quick Links
- KIRBY Spares, Parts & Accessories
- HENRY Spares, Parts & Accessories
- MIELE Spares, Parts & Accessories
- SEBO Spares, Parts & Accessories
- KIRBY Legend II Spares & Accessories
- KIRBY G3 Spares, Parts & Accessories
- KIRBY G4 Spares, Parts & Accessories
- KIRBY G5 Spares, Parts & Accessories
- KIRBY G6 Spares, Parts & Accessories
- KIRBY Ultimate 'G' Spares, Parts & Accessories
- DYSON DC04 Spares, Parts & Accessories
- DYSON DC07 Spares, Parts & Accessories
- DYSON DC14 Spares, Parts & Accessories
- DYSON DC15 Spares, Parts & Accessories
- DYSON DC16 Spares, Parts & Accessories
- DYSON DC18 Spares, Parts & Accessories
- DYSON DC21 Spares, Parts & Accessories
Product Search
Top Searches
Price Match
Secure Site
Replacing the Washable Pre Motor Filter
1. Depress the catch at the top of the cyclone top assembly handle and remove it from the Dyson.
Replacing the Belt (Models WITHOUT Brush Control)
1. Start by laying your Dyson onto it's back and, using a two pence piece, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction. 2. Remove the soleplate by prising it away from the cleaner head, underneath the centre soleplate fastener. 3. Using a large screwdriver prise the belt from the m...
Replacing the Hose
1. Firstly remove the power cable from the rear of your DC14 and then release the wand handle from the main body....
Replacing the Brush Roll (Models WITHOUT Brush Control)
1. Start by laying your Dyson onto it's back and, using a two pence piece, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction. 2. Remove the soleplate by prising it, underneath the centre soleplate fastener, away from the cleaner head. 3. Using a large screwdriver prise the belt from the mot...
Replacing the Brush Bar (Models WITH Brush Control)
1. Lay your Dyson onto it's back and, using a two pence piece or a large flat screwdriver, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction....
Replacing the Cable
1. Start by unwinding the cable from the rear of the Dyson. Remove the wand assembly....
Replacing the Switch
1. Start by unwinding the cable from the rear of the Dyson. Remove the wand assembly....
Replacing the Clutch
1. Lay your Dyson onto it's back and, using a two pence piece or a large flat screwdriver, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction....
Replacing the Clutch Belts
1. Lay your Dyson onto it's back and, using a two pence piece or a large flat screwdriver, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction....
Replacing the Motor (Models WITHOUT Brush Control)
1. Start by laying your Dyson onto it's back and using a two pence piece, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction. 2. Remove the soleplate by prising it away from the cleaner head, underneath the centre soleplate fastener. 3. Using a large screw...
Replacing the Motor (Models WITH Brush Control)
1. Lay your Dyson onto it's back and, using a two pence piece or a large flat screwdriver, turn each of the three soleplate fasteners a quarter of a turn in an anti-clockwise direction....
Replacing the Wheels
1. Start by laying your Dyson onto it's side and, using a thin flat bladed screwdriver, prise off the glamour cap (hub cap) from the wheel....