Changing the Hose

PLEASE NOTE: If your are in anyway unsure of any of the steps listed below. Please consult a qualified electrician and always remove the plug from the socket before commencing work.

1. Start by depressing the brightly coloured buttons located either side of the cuff on the wand assembly to release the hose.

2. Then remove the cyclone/bin assembly.

3. Detach the hose from the main body by simply pulling it out of it's socket.

4. Then remove the hose bracket from the main body by pulling back on the locating tab.

Reassembly is a simple matter of reversing the steps listed above.