Call Us
01634 305021
9 to 5 - Mon to Fri
Quick Links
- KIRBY Spares, Parts & Accessories
- HENRY Spares, Parts & Accessories
- MIELE Spares, Parts & Accessories
- SEBO Spares, Parts & Accessories
- KIRBY Legend II Spares & Accessories
- KIRBY G3 Spares, Parts & Accessories
- KIRBY G4 Spares, Parts & Accessories
- KIRBY G5 Spares, Parts & Accessories
- KIRBY G6 Spares, Parts & Accessories
- KIRBY Ultimate 'G' Spares, Parts & Accessories
- DYSON DC04 Spares, Parts & Accessories
- DYSON DC07 Spares, Parts & Accessories
- DYSON DC14 Spares, Parts & Accessories
- DYSON DC15 Spares, Parts & Accessories
- DYSON DC16 Spares, Parts & Accessories
- DYSON DC18 Spares, Parts & Accessories
- DYSON DC21 Spares, Parts & Accessories
Product Search
Top Searches
Secure Site
Replacing the Pre Motor Filter
PLEASE NOTE: Always remove the plug from the socket before commencing work.
1. Start by pushing the locating ring above the filter housing forward to release the filter housing.

2. Remove the filter housing by sliding it out from the main body.

3. After removing the pre filter from its housing it can be cleaned by first pulling the inner section out of the outer cylinder. Then rinsing the inner section with warm soapy water. The filter must be thoroughly dried before refitting to the Dyson.


Your Basket
Log In