Product Search

 

Top Searches

 

Price Match

Price Match
 

Secure Site

Secure Site
 

Hottest Products

 
You are here:  » Help and Support » Dyson Section » Dyson Technical Advice » DYSON DC01 Technical Advice
image:Replacing the Belt

Replacing the Belt

1. Remove the soleplate assembly by removing the 3 crosshead screws (arrowed) and gently pulling the soleplate away from the cleaner head.

Read full article...

image:Replacing the Brush Roll

Replacing the Brush Roll

1. Remove the soleplate assembly by removing the 3 crosshead screws (arrowed) and gently pulling the soleplate away from the cleaner head.

Read full article...

image:Replacing the Cable

Replacing the Cable

1. Remove the cyclone and bin assembly by grasping the bottom of the bin and rotating the cyclone assembly upwards. The cyclone will become unattached from the cleaner's main body.   2. Using a torx T15 screwdriver, remove the screw holding the switch cover plate.   3. Then remove the switch cover.   ...

Read full article...

image:Replacing the Switch

Replacing the Switch

1. Remove the cyclone and bin assembly by grasping the bottom of the bin and rotating the cyclone assembly upwards. The cyclone will become unattached from the cleaner's main body.   2. Using a Torx T15 screwdriver, remove the screw holding the switch cover plate.   3. Then remove the switch cover.   ...

Read full article...

image:Replacing the Motor

Replacing the Motor

1. Remove the soleplate assembly by removing the 3 crosshead screws (arrowed) and gently pulling the soleplate away from the cleaner head....

Read full article...